NTSB: Crash-preventing safety system was being installed
Railway signals were out while crews installed a safety system that could have prevented the exact type of crash that killed two people in South Carolina when an Amtrak train was diverted to a side track and slammed head-on into an empty freight train, authorities said Monday.Posted — Updated
Automated signals that could have warned the passenger train to stop before reaching the switch sending it down the side track were turned off as workers installed a GPS-based system called positive train control, or PTC, National Transportation Safety Board Chairman Robert Sumwalt said.
A day before, Sumwalt told reporters "an operational PTC is designed to prevent this type of incident."
The crew that parked the CSX freight train on the side track and left the padlocked switch in position to divert trains from the main line were interviewed Monday, along with the dispatcher keeping up with trains in the area as the signals weren't working, Sumwalt said.
Sumwalt told reporters he had not been briefed about what the CSX workers said.
"When the signals are not operating," he said, "the dispatcher will authorize the train to operate in a certain territory. That’s how they were operating on the morning of the accident."
The Amtrak engineer sounded his horn seven seconds before the crash and applied emergency brakes three seconds before the train collided with the other locomotive at 50 mph (80 kph), Sumwalt said, citing information from the passenger train's data recorder.
"The expectation for the Amtrak crew is that they were clear," Sumwalt said.
"The recording actually ends a few seconds prior to the collision, so our engineers area attempting to recover, forensically recover, information," he added.
Positive train control is already installed in parts of the U.S. The system is designed to prevent two trains from traveling on the same track at the same time.
That's what happened early Sunday in Cayce, S.C., when the New York-to-Miami Amtrak passenger train hit the parked CSX Corp. freight train.
Two Amtrak employees, a conductor and an engineer, were killed, and more than 100 passengers were treated at hospitals for injuries. It was the third fatal Amtrak train crash in less than two months.
"I think it’s very important that we have to look at each of these accidents in isolation to be able to determine if there are systemic issues," Sumwalt said.
Why hasn't the PTC system been widely implemented? Both industry experts and rail companies say, in large part, it comes down to costs and the sheer size of the nation's rail system.
After a collision between a commuter train and a freight train in Chatsworth, Calif., that killed 25 people, Congress passed a law in 2008 requiring railroads to adopt the technology on all tracks that carry passenger trains.
Positive train control relies on GPS, wireless radio and computers to monitor train positions and automatically slow or stop trains that are in danger of colliding, derailing from excessive speed, or about to enter track where crews are working or that is otherwise off limits.
Railroads were given seven years to start using the technology across the country's 20,000 locomotives and 60,000 miles of track. But when it became clear that few if any railroads would meet the deadline, Congress extended it another three years to Dec. 31, 2018, with the option to grant railroads that show progress an additional two years to Dec. 31, 2020. Several freight railroads have previously told the government they won't be able to meet the 2018 deadline.
Overall, freight railroads have implemented PTC on 56 percent of required route miles, according to the Association of American Railroads. The association said it's not clear yet how many of the seven large freight railroads operating in the U.S. will require extensions.
In some areas of the northeastern U.S., where Amtrak owns both railways and locomotives, the company has been able to successfully set up PTC. But in areas like South Carolina, the tracks are owned by freight companies like CSX.
During a conference call with reporters, Amtrak President Robert Anderson said Sunday's crash underscores the importance of meeting the year-end deadline for widespread implementation.
CSX, which operates throughout the eastern U.S., has already spent more than $1.2 billion on PTC systems, according to congressional testimony by company executive Frank Lonegro in 2015. On its website, the company says it's also been limited by lengthy review processes needed to implement the system on 15,000 miles of track.
Amid the renewed calls for action, former inspector general for the U.S. Department of Transportation Mary Schiavo said the system needs to be installed everywhere because "lives are at stake."
"People aren't focused on it until we have tragedies," Schiavo said.
Associated Press writers Jeffrey Collins in Columbia, South Carolina, Michael R. Blood in Los Angeles, and Joan Lowy in Washington contributed to this report, along with AP video journalist Josh Replogle.
Kinnard can be reached at http://twitter.com/MegKinnardAP. Read more of her work at https://apnews.com/search/meg%20kinnard.
Copyright 2023 by WRAL.com and the Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.